Digiwave DLT300 pocket transceiver, cover & lanyard

The Digiwave DLT 300 Transceiver features full-duplex capability, supporting up to six simultaneous talkers in two-way mode. Slim, lightweight, and simple to set up and use. Listen-only or two-way operation offers flexibility in an array of applications. With the push of a button, users can access two-way communication for immediate interaction or Q&A.

The DLT 300 has an internal rechargeable battery with an operational time of up to 14hrs. Each DLT 300 is packaged with an individual charger - charge time 5hrs.
Operating range — up to 229 metres (depending on environment).

The DLT 300 pairs with the DLR 360 listen-only receiver.

IN DEPTH:
The DLT300 is a digital transceiver operating on the 2.4 GHz ISM band utilizing FSK modulation with patented frequency-hopping software to reduce interference potential. Housed in a lightweight plastic enclosure 4.07" H x 2.43" W x 0.44" D (103.3 x 61.8 x 11.3 mm), it has an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying, battery level, mode, time, channel number, group number, and number of other DLT’s with the talk button on (up to 6). It has a built-in microphone and speaker for users opting not to use a headset.
Power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The transceiver operates in one-way or two-way mode (up to six speakers in a group at any given time) and have a range of up to 750 ft (229 m).
The transceiver has power, vol +, vol -, talk, CH +, CH -, v, GRP and ^ buttons. It shall have an illuminated talk button with a tactile braille dot.
The transceiver has a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or guest operation) and (floor + 14 language portable interpretation where common floor language is used).
The transceiver has 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access.
The transceiver will operate up to 15 simultaneous channels in interpretation mode, support 4 simultaneous groups in two-way mode, allow a maximum of 4 simultaneous talkers in 2-way mode, and a maximum of 6 simultaneous talkers in Intercom Mode. There is also a repeater mode to increase the range of the system when used in interpretation mode.
The transceiver has a 74 dB (A weighted) SNR with a frequency response of 140 Hz to 11.5 kHz in Conference and Interpreter Modes and 140 Hz - 7.6 kHz in Intercom Mode.
The transceiver is compliant with FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM requirements.