4 x SR2020D Transmitter + antenna combiner in rack

Ideal for conferences and events needing multiple-channels, like break-out sessions or for simultaneous translation. You can use two racks simultaneously when set to ‘conference mode’ for 8 discrete channels to stethoset or pocket tour guide receivers. The receivers will need programming to change the channel selector to 'conference mode' (8 channels), as the default is to match portable transmitters or 'tourguide mode' (6 channels).

This SKB rack contains 4 x Sennheiser SR 2020 Digital tourguide transmitters with an AC 3 antenna combiner to a single antenna output (stub antenna included). Packaged with a low-loss cable to an omni-directional antenna. The antenna mounts to a microphone stand (not included); we also have various clamps and fixings available separately.

The Sennheiser SR2020D transmitter is operated very easily. Important parameters such as channel selection and line/mic input levels can be checked on the back-lit display.

FEATURES

• 6 channels in tourguide mode
• 8 channels in conference mode (requires receivers to be programmed)
• Operates in the licence-free range Europe: 863-865 MHz (channel 70)
• Digital RF-transmission utilises a frequency modulation scheme of 2 frequency-shift keying (FSK), with an RF output power of 10mW.
• Optimised for speech transmission, the matching mono receivers have an AF response of 100-7,000Hz @<1%THD.
• 19" rack-mount kit included
• Very easy configuration and usage
• Balanced XLR-3F input, for line level audio from a mixer desk or, a condenser microphone (48V phantom powered type only).
• 6,3mm jack-plug headphones connection with volume control for independent monitoring
• Backlit display shows: Channel selection, Input level and input peak

External dims 55 x 26 x 36cm